Low Sheen Wet Look Lacquer
Our solvent-based, low sheen, crystal clear, deep penetrating sealer
is designed for decorative concrete, paving stone and natural stone
surfaces, to enhance and beautify their natural color.
• Water repellent
• Non-yellowing and UV resistant
• 80-85% color densification
• Interior and exterior use
• Inhibits efflorescence
• Gas, oil and grease resistant
• Easily applied, fast drying, long lasting
Our solvent-based, low sheen, crystal clear, deep penetrating sealer is designed for decorative concrete, paving stone and natural stone surfaces, to enhance and beautify their natural color.
Poduct Information
Low Sheen Wet Look Lacquer is a solvent-based, high gloss, crystal clear, deep penetrating barrier coating for decorative concrete, stone, natural and manufactured hardscape surfaces. Low Sheen Wet Look Lacquer provides a ‘water-wet’ appearance which enhances and beautifies the natural color of the applied surface. Non yellowing Low Sheen Wet Look Lacquer seals against food stains, gasoline, grease, oils, water and acid. Its deep bonding formula resists peeling, chipping, cracking and UV degradation.
Made from the latest developments in VOC compliant solvent-based acrylic chemistry, meeting the strictest national and state requirements. Low Sheen Wet Look Lacquer delivers excellent resistance to the formation of efflorescence. When used on newly placed concrete, the sealer will help protect against spalling, dusting, freeze-thaw damage and alkali degradation. Low Sheen Wet Look Lacquer remains hard even under extreme sunlight and delivers superior wear resistance. Its VOC compliant formula works great indoors and outdoors to provide a breathable barrier that allows moisture to escape from the coated surfaces. It is also effective as a joint sand stabilizer for interlocking pavers.
FEATURES:
- Easily applied, fast drying, long lasting
- Interior and exterior use
- Inhibits efflorescence
- Gas, oil and grease resistant
- Water repellent
- Non-yellowing and UV resistant
- 80-85% color densification
LIMITATIONS:
Not recommended for pre-sealed surfaces or non-porous surfaces such as ceramic tile, marble, granite, porcelain and terrazzo. Do not use where hydrostatic pressure is possible.
USE ON:
Standard concrete Colored and stamped concrete Exposed aggregate concrete Natural stone Manufactured stone Interlocking pavers Porous brick Mexican tile Wet Cast concrete products
Meets or exceeds Federal EPA standards for VOC compliance.
Meets or exceeds South Coast Air Quality Management District and the Bay Area Air Quality Management District, for VOC compliance of less than 100g/l required by the State of California.
