Stain Block Elite
Stain Block Elite is a state-of-the-art penetrating sealer that
is equally effective on porous and dense surfaces
such as concrete, natural stone and masonry.
• Silicone free, re-coatable
• Easy application and fast drying
• Water and stain resistant
• 3-5% color densification
• Water-based, solvent free and low odor
• Excellent penetration, long lasting
• Interior and exterior use
• Repels gas, oil and grease
• No change to surface appearance
Product Information
Stain Block Elite is a state of the art, water and stain resistant, penetrating fluoropolymer impregnating sealer. It has been specifically designed for porous to dense concrete, brick, natural and manufactured stone surfaces. When dry it is virtually invisible, leaving the surface with its original appearance and breathability. It resists oil and grease stains, rust stains, moss, mildew and spalling problems associated with freeze/thaw cycles. Stain Block Elite provides superior protection against moisture penetration, thereby reducing the formation of efflorescence.
Stain Block Elite chemically bonds with the silicates present in the surface, forming an insoluble barrier that will not fade, yellow, crack or peel. It is highly alkaline resistant and designed for use on dense surfaces such as marble, granite, limestone, travertine, polished or tumbled stones, concrete, brick, pavers, slate, precast concrete, tile and manufactured or natural stone. It is easy to apply and fast drying. Commonly used in both commercial and residential applications, i.e. dining, food preparation and serving areas.
- Water-based, solvent free and low odor
- Excellent penetration, long lasting
- Interior and exterior use
- Repels gas, oil and grease
- No change to surface appearance
- Silicone free, re-coatable
- Easy application and fast drying
- Water and stain resistant
- 3-5% color densification
• Meets or exceeds Federal EPA standards for VOC compliance.
• Meets or exceeds South Coast Air Quality Management District and the Bay Area Air Quality Management District, for VOC compliance of less than 100g/l required by the State of California.
Product Information
Clean Concrete is a fast acting biodegradable organic salt acid cleaner designed to remove efflorescence, rust, cement scale, mortar, lime deposits, sanded grout residue, hard water deposits and other heavily accumulated dirt and grime. This product is designed for use on non-polished surfaces like: concrete pavers, brick, exposed aggregate, limestone, concrete, slate, granite, marble, sanded grout, porcelain and ceramic tile.
Clean Concrete is a certified ‘green technology’ product. With GST green products we guarantee compliance with current established green standards. This product is in manufacturing compliance with EPA/DfE, FDA, NSF, Green Seal, SCAQMD, DOT, Weights & Measures and Water Resource Board.
Clean Concrete is the ultimate solution for efflorescence removal when applied to the affected surface. Clean Concrete will effectively help remove efflorescence from your hardscape project. In some cases, where the efflorescence has calcified, multiple applications may be required. Unlike other efflorescence cleaners, our state of the art, environmentally friendly Clean Concrete will limit the negative effects associated with other products.
Pro-Grade Cleaner should always be used as a neutralizing rinse to restore the pH balance on all hardscape surfaces and is mandatory prior to sealing whenever Clean Concrete has been used. This will also apply to any acid staining and/or acid cleaning etching. Using Pro-Grade Cleaner as a neutralizer will ensure proper adhesion. This product is non-toxic and color safe for poured in place concrete, stamped concrete and paving stones.
- Removes efflorescence
- Removes rust and cement scale
- Effective on pavers, concrete and brick
- Easy to apply
- Replaces heavy acids
- Environmentally safe, biodegradable
- Safe and easy to use, water clean up
• Meets or exceeds Federal EPA standards for VOC compliance.
• Meets or exceeds South Coast Air Quality Management District and the Bay Area Air Quality Management District, for VOC compliance of less than 100g/l required by the State of California.
