Waterproofing
Vetrofluid
Ecological anti-deterioration protection that penetrates 1.5 to 3 inches into concrete. Vetrofluid reacts with the free lime, pozzolans, and unhydrated cement within the concrete matrix to form additional calcium-silicate-hydrate (C-S-H), permanently densifying and waterproofing the slab from within. Transparent and odorless. Ideal for critical infrastructure where internal water retention or contamination must be prevented. For full technical testing and documentation, visit ecobeton-usa.com.
1 / 3Ecological anti-deterioration protection that penetrates 1.5 to 3 inches into concrete. Vetrofluid reacts with the free lime, pozzolans, and unhydrated cement within the concrete matrix to form additional calcium-silicate-hydrate (C-S-H), permanently densifying and waterproofing the slab from within. Transparent and odorless. Ideal for critical infrastructure where internal water retention or contamination must be prevented. For full technical testing and documentation, visit ecobeton-usa.com.
- Penetration Depth
- 1.5 to 3 inches
- Packaging
- 13.2 lbs (covers approx. 162 sq ft)
- Yield
- 0.82–1.64 oz/sq ft
- Appearance
- Transparent odorless liquid
Applications
- Retaining walls
- Dams
- Drinking water tanks
- Foundations
- Tunnels
Technical Specifications
| Product Specifications | |
|---|---|
| Penetration Depth | 1.5 to 3 inches |
| Packaging | 13.2 lbs (covers approx. 162 sq ft) |
| Yield | 0.82–1.64 oz/sq ft |
| Appearance | Transparent odorless liquid |
Performance Comparison
Cost Elimination
Replaces Sacrificial Cures
Apply shortly after bleed water dissipates. No separate cure needed, no post-cure cleaning required.
Replaces Release Agents
Apply to forming wood/plywood. Eliminates the need for toxic, VOC-heavy epoxy-based release agents.
Replaces Densifiers
Treated concrete does not require a separate densifier and can be mechanically polished directly.
FAQ
- How does Vetrofluid work inside the concrete matrix?
- Vetrofluid penetrates existing concrete to an average depth of 1.5 inches and up to 3 inches on new concrete. Rather than forming a surface barrier, it reacts with the free lime, pozzolans, and unhydrated cement within the concrete to form additional calcium-silicate-hydrate (C-S-H) — the same binding compound that gives concrete its strength. This reaction permanently seals pores and densifies the matrix from the inside, providing long-term anti-deterioration protection that cannot delaminate or peel.
- Why must Vetrofluid be applied as a post-cure treatment over cured Elephant Armor?
- Approximately 2 hours after Elephant Armor achieves final set (indicated by a lightening in color), apply a light coat of Vetrofluid using a low-pressure pump sprayer. This provides an extra layer of permanent waterproofing and significantly enhances bond longevity by densifying the repair at depth.
- Where can I find full technical testing and documentation for Vetrofluid?
- Comprehensive third-party test results, application case studies, and technical data sheets are available at ecobeton-usa.com.
